Basket Strainer

October 23rd, 2008

We provide standard and custom made basket strainer. Design for inexpensive protection for your costly equipment likes pump, heat exchanger, valve and all mechanical from dirt scale.

Applications

  • Process Industries
  • Power Industries
  • Chemicals Industries
  • Oil & Gas
  • Metal & Mining
  • Water & Waste Water
  • Pulp & Paper
  • Steel Mills
  • Marine etc…..

Features

  • Standard sizes from 2" to 24" and suitable for bolting between ASME b16.5 class 150, 300, 600, 1500 as well as DIN standard.
  • Filtration of up to 5 micron are available
  • SS304, SS316, SS316L, carbon Steel or Monel are available for your choices.
  • Wire Mesh – either in single or multi-layer of selected material.
  • Perforated Plate – open area of up to 40%.
  • Flow Rate from 20 gpm to 20,000 gpm in single strainer.

Contact us at : Sales-inquiry@universal-filtration.com

Posted in Basket Strainer | No Comments »

Stainless Steel Filter Cartridge

October 23rd, 2008

We offer standard DOE and SOE type Stainless Steel Filter Cartridge for liquid and gas process with various stainless steel media provide optimum solution in high pressure and temperature applications.

Applications

  • Liquid & Gas at high operating temperature
  • Liquid & Gas at high differential pressure
  • Corrosive Liquid & Gas
  • High Viscosity Fluid
  • Process Steam
  • Hydraulic Oil
  • Cryogenics Fluid

Features

  • All Stainless Steel Construction
  • Woven and Non Woven media
    • Classical weave 5mm to 25 micron
    • Dutch Weave 300 to 6 micron
    • Multipor (Porosity 45%) 90 to 15 micron
    • Sintered Metal Fibre 100 to 1 micron Absolute
    • Sintered Metal Powder 100 – 0.2 micron

  • Pleated for high capacity
  • Consistent and Fixed pore size
  • High pressure & temperature resistant
  • Cleanable
  • SS304, SS316, SS316L or special material on request.

Posted in Stainless Steel Filter Cartridge | No Comments »

Filter Cartridge

October 23rd, 2008

We have a complete high quality filter cartridges products to meet your filtration requirement

Membrane Pleated Cartridge

  • UN6/66 – Nylon Membrane Pleated Cartridge
  • UPES – Polyethersulfone Membrane Pleated Cartridge
  • UPTFE- PTFE Membrane Pleated Cartridge
  • UPVDF- Full PVDF membrane Pleated Cartridge
  • 100% integrity test
  • Manufacture in class 1,000/ environment
  • Flashed with 18 mega ohm DI water

UPL Absolute rate PP Pleated Cartridge

  • Offer you a reliable and absolute rated particle retention
  • Large surface area for high flow rate and dirt holding capacity
  • 100% PP construction, end cap with thermal bonding
  • All materials are FDA listed for F&B application
  • We have DOE, SOE (222-FIN, 222-Flat, 226-FIN, 226-Flat configuration
  • 5”, 10”, 20”, 30” and 40”
  • 0.1, 0.2, 0.5, 0.8, 1, 2, 3, 4, 5, 10, 20, 30, 40, 70 micron

UMB PP Melt Blown Cartridge

  • Made of pure PP material
  • Superior depth filtration capability
  • Stable pressure drop and long service life
  • 5”, 9.75”, 10”, 19.5”, 20”, 29.25”, 30”, 39”, 40” and other special size on request.

USW Wound Cartridge

  • Unique winding structure of loose outer layers with tight inner layer for better performance
  • High dirt loading and extremely low media migration
  • Available in PP, Bleach Cotton & Glass Fiber media
  • 5”, 9.75”, 10”, 19.5”, 20”, 29.25”, 30”, 39”, 40” and 50”  , extended core is available too.

UAC Activated Carbon Cartridge

  • We offer Carbon Block type, Carbon impregnated Cellulose type and Carbon Granular Wound Cartridge.
  • Length available in 5”, 10”, 20”, 30” and 40” & 10”, 20” in Big Blue type

USC Stainless Steel Cartridge

  • Choice of SS304, SS316, SS316L material
  • Depth or Pleated Type Construction
  • No Fiber Migration
  • Up to 0.2 micron absolute
  • Double open end or Single Open end configuration available

You may download detail of our brochure by click here

Posted in Cartridge | No Comments »

Bag Filter

October 23rd, 2008

Nothing is too big or too small the flow that we can’t challenge! Our filter vessel can handle liquid flow rate from 1 m3/hr – 1,000 m3/hr.

Universal Single Bag Filter

To filter up to 40m3/hr, is constructed with modern engineering technology of precision cast stainless steel component to streamline the liquid flow to reduce the pressure loss and minimize unnecessary welding process that make difficulty in vessel cleaning.

Wide choice of single bag filter vessels-

Universal Top inlet vessel

Universal Top inlet vessel designed to give you perfect 360 degree sealing of plastic collar fully welded filter bag sit inside the vessel to ensure absolute no by pass, it gives you the top performance in your most challenging filtration process.

/download Brochure

Universal Side inlet vessel

Our durable vessel design to give you the convenient in handling your filtration process, easy opening mechanism and bag fixing ring to ensure good sealing for both plastic collar fully welded filter bag and sewn felt or NMO filter bag. It is suitable for general filtration requirement in all the industrial applications with liquid of low to medium viscosity.

/download Brochure

Universal Economic version

Economics side inlet vessel to meet your cost budget requirement in filtration equipment selection, yet providing a good sealing mechanism, strongly recommend for water filtration process.

/download Brochure

Universal Multi Bags Filter

our User friendly design with construction from 3 bags to 24 bags to meet larger liquid flow rate requirement up to 1,000 m3/hr, all vessels design in ASME VIII section I standard

We accept custom made vessel to fit your requirement for piping and flange connection in JIS, DIN or ANSI standard, Tri- clover sanitary connection etc.

/download Brochure

 

Posted in Bag Filter | No Comments »

Filter Bag

October 13th, 2008

A wide choice of filter bags to meet your critical demands for filtration.

Best alternative substitute to Eaton, Hayward, GAF or LOEFFLER sentinel, snap ring filter bag, FSI Polyloc filter bag.

Absolute Rated Polypropylene Melt Blown Filter Bags

gives you the depth filtration of up to 99.9% particle removal efficiency to meet your critical process needs in Semi-conductors & Electronics, Fine Chemicals & Solvent, Epoxy Coating, Food & Beverage Industry.

Extended service life Polypropylene and Polyester felt Filter bag

with feature of more depth of unique fiber orientation to give you high dirt loading capacity up to four times more of particle retention than normal felt bag, it is not only saving of downtime for bag change-out but also very cost effective.

Download Brochure

Polypropylene ( PP ) and Polyester ( PE ) Fully Welded Filter

Bag of up to 90% particle removal efficiency from 1 micron to 200 micron particle removal for 100% by-pass risk free filtration.

Download Brochure

Sewn Polypropylene and Polyester felt filter bags

For economic filtration.

Download Brochure

NMO filter bag

For absolute filtration of higher micron particles removal.

Download Brochure

Carbon filter bag

To remove organic substances, it combined with 25 micron final filtration.

Download Ordering Information

Contact us at : Sales-inquiry@universal-filtration.com

Posted in Filter Bag | Comments Off

Cartridge Vessel

October 13th, 2008

A full range of Stainless Steel Cartridge Vessel from Single piece to more than 100 rounds of cartridge installation from 4" to 40" length to meet your requirement.

Single Cartridge Vessel

Material – SS304, SS316

For Single Open end and Double Open End cartridge configuration.

Light Duty Multi-Cartridge Vessel

3,5 and 7 Rounds to meet most of the filtration requirement

Quick opening V-Clamp closure design;

Available in 3, 5 and 7 rounds of up to 40” cartridge length.

SS Material -304, 316

Inlet/Outlet – 2” NPT /ANSI Flange JIS and DIN Flange are also available

O-ring- EPDM (standard);

Glass Blasted and mechanical polishing surface, electro-polishing an option.

Download Brochure

Heavy Duty Cartridge Vessel

         

Heavy Duty Cartridge Vessel – from 9 to 100 Rounds of cartridge per vessel, with swing eye bolt closure, we have special design feature to make the changing of cartridge simple and easy.

Up to 100 rounds cartridge vessel for all industrial needs application with unique spring lifting design opening mechanism make changing cartridge so easy that can be handle by one person.

ASME CODE design;

Accept 9-100 round (20”,30”,40”,50” Cartridges)

S.S. Material -304,316,316L;

Inlet/Outlet – 3”- 12” Flange

O-ring – EPDM (standard); Silicon, Viton, Teflon caps Viton…etc

Low Profile design Tangential outlet to reduce vessl height

Download Brochure

Download Ordering Information

Contact us at : Sales-inquiry@universal-filtration.com

Posted in Cartridge | Comments Off